Tree Trimming Bell California

(213) 344-0194

What are the benefits of tree trimming?

Tree trimming will promote better growth of your trees. Trees trimmed on a regular basis are less likely to suffer from disease, insect infestation and it promotes faster leafing out. Estates with mature trees can benefit from curbside tree care services that include the removal of messy webbing, diseased branches or hazardous live electric wires near power lines. Tree trimming not only helps make homes safer but more attractive as well.

In addition, tree trimming helps improve air quality by removing tree limbs that are cluttering up our roads and highways. This provides cleaner air for everyone to breathe!

Tree trimming also helps remove tree limbs that are touching power lines or tree branches rubbing against neighboring tree limbs. This keeps tree branches from catching fire during strong winds, storms, or lightning strikes.

Another benefit of tree trimming is it allows the trees in your yard to grow and thrive. It helps promote healthy growth and keeps branches from rubbing against each other and causing damage. Tree branches that go un-pruned can crack, split, or break off during storms. This leads to further problems with debris cluttering up our roads, which again leads to poor air quality for everyone! It can also cause too much shade in your yard which prevents proper nourishment for the grass and plants underneath the tree.

Who should do tree trimming?

Individuals who perform tree trimming work include arborists and tree pruners. Arborists are people who have comprehensive knowledge of tree biology and care. They can provide tree assessment services, which may include tree trimming or tree removal recommendations. Tree trimmers are people who remove branches from trees to make them more aesthetically pleasing or to clear utility lines. Tree surgeons are people who perform surgery on trees, including tree trimming, and removals. Tree pruners are people who cut away small limbs from trees.

All of these individuals can be hired independently or through a tree service company. It is important to ask for references and to check the license of the individual or company before hiring them.

Call Now - (213) 344-0194

Get Your Free Quote!

* 100% Privacy Guaranteed, see our Privacy Policy.
Grape tree pruning.

What is tree lacing and cabling?

Tree lacing and cabling are two different types of tree operation. Tree lacing is the more traditional type of lace that intertwines around tree branches or posts at intervals to create a flat woven system.

Cabling uses a rectangle-shaped piece of material with holes in it and lays the strap against and over another post and interlocks them together so they can be pulled tight. Both types of lace offer stabilization and equalization to the tree. Their flatness is important because it allows you to strap around both sides of a branch or post which offers more stability than hoop straps. The material choices range from galvanized wire, to plastic coated cable, and high-test braided nylon rope. Cable lacing also requires two pieces of strap material so that the lace can be tightened like a Tourniquet.

Tree lacing:

  • better for small trees (tighter turns)
  • holds entire circumference at once, reducing the effort required to tighten the ropes
  • works well with large trees (larger branches need more support)
  • easy to adjust one side without affecting the other
  • works well with trees that have rounded or irregular shapes

The proper way to lace a tree

Tree Lacing: similar to lashing, but weave through posts/branches instead of wrapping around them. It is much more difficult than lashing because you can't see what you are doing so it requires lots of patience. There are different types of lace patterns depending on how many prongs there are and where they are located. The wheel pattern is used for small trees (3 prongs), the diamond pattern is used for large trees (4+ prongs). Cablelacing uses two pieces of rope sewn together at an angle so there would be 4 ends . The two ropes are threaded through each side of the tree and then brought together to form a knot. This knot is tightened using a Tourniquet (a third piece of rope).

Both types of lacing are great for stabilizing trees and should be considered when doing any type of tree trimming. Tree lacing is more traditional and cable lacing is more adjustable, so it is important to choose the right type for the job. With either type, make sure to use high-quality materials that will last in all weather conditions. For more information on specific techniques and materials, please consult an arborist or tree-trimming professional.

Call Us Now - (213) 344-0194
Trimming trees

What is wood chipping?

Wood chipping is a service most often used in gardens to provide a surface for plants and to create the illusion of water.

Wood chips can be thought of as artificial turf for your garden. We install them on slopes where the soil will just wash away, or areas where you've spent thousands of dollars planting landscaping that will just get trampled if people walk on it. It's not just great for making an attractive landscape, but they're especially key in flood prone areas which would otherwise be unsafe without expensive engineering installations installed prior to a rainy season. For many years we had been working with manufacturers to come up with a sustainable material that wouldn't cost too much while serving these critical functions - and finally we're now able to offer woodchip installation at competitive prices.

We also offer a wide range of mulch and woodchip products that will help you create stunning landscapes year round, as well as tree care services such as tree pruning and tree removal.

Call Us Now!

What is tree crown reduction?

Tree crown reduction is a technique used to reduce the amount of shading and consequent cooling coming from the foliage of one tree onto other trees below. The idea is that by removing some or much of the leafy area at the top, less leaf surface will be exposed to sun, which means less water needs to be captured and converted into coolness for those leaves, so their need for sunlight is reduced too.

The technique may work best on tall trees such as elms, oaks and maples because it seems natural so cut off parts of natural growth patterns at their most rapid stage – typically during each winter. And if you remove the outermost branches closest to ground level – well beyond any significant root flare – there's no reason to assume that tree will suffer.

Tree crown reduction may also help the entire neighbourhood by reducing rainfall runoff and sewer overflows caused by excessive tree canopy during storms, which often lead to basement flooding. Many cities such as Toronto and Calgary have approved standards for tree canopy cover of between 25 and 40 percent because a lush green blanket over a city is aesthetically appealing. But it's not recommended, in most places outside Alberta, for municipalities to maintain a specific percentage because it could be counterproductive in areas where stormwater management is a concern.

What types of trees benefit from this?

The best trees for crown-reduction treatments are ones that stand tall with large branches near ground level responsible for much of their self-shading. However you can reduce shading from a whole range of trees provided the canopy doesn't include a low limb structure.

The following trees are well suited to crown-reduction treatments:

  • Oriental Plane tree – Platanus orientalis – 80% shade reduction recommended, 5% survival rate reported
  • Green Ash – Fraxinus pennsylvanica – 70% shade reduction recommended, 15% survival rate reported
  • Norway Maple – Acer platanoides – 60% shade reduction recommended, 20% survival rate reported
  • Silver Maple – Acer saccharinum– 55% shade reduction recommended, 25 % survival rate reported

Call For A Quote - (213) 344-0194
Stump grinding machine removing cut tree

What is tree crown thinning?

Tree crown thinning is a type of forest management that seeks to improve the health of individual trees throughout the leafless winter season.

A relatively new practice, it originated in Europe, probably around 2000-2008. The idea is that if enough bare branches are left within view during winter's gray days, humans will have enough motivation to keep cutting back snow cover so as not to suffocate roots or smother tender bark. Fewer trees die every year this way, reducing natural loss rates and keeping healthy forests growing well into their 3rd century. Happy forests are rich in biodiversity - birds fly overhead gorgeously colored by carotenoid pigments obtained from autumnal mast, foraging for insects below golden leaves present until early December.

Some foresters have been advocating for hazard tree removal - cutting down dangerous trees that are vulnerable to storm damage. They suspected that forests with fewer broken trees might be more resistant to natural calamities. By covering small groups of trees with wire mesh and periodically applying a positive voltage, the tree crowns were stung into submission - this is called crown voltage reduction. The results were encouraging: Trees numbed in this way experienced considerably less breakage during windstorms!

The implication was clear--trees proactively maintain their balance by pruning themselves to death. More healthy trees equal more likely negative ion production, which leads to slower decay speeds, stronger wood grain orientation.

There are many reasons why treating your local forest for thinning benefits should be top priority: it's good for individual tree health; it's good for biodiversity and resistance to natural calamities; and it's good for the production of negative ions, which means a healthier, more pleasant environment all around. Who wouldn't want that?

So go out there and give your local forestry department a call! Ask about signing up for a tree crown thinning class, or volunteer with a friends group that helps maintain the area's green spaces. It's a great way to get to know your community while helping make it a more beautiful, healthy place to live.

Trim Your Trees
Tree trimming

How much does tree trimming cost?

The price of tree trimming service varies depending on the size and location of the trees.

The good news is that by hiring a professional, you can be sure that any potential dangers to yourself or your property are addressed and you don't need to worry about the safety of your plants or animals. A licensed arborist will also do correct pruning rather than indiscriminate cutting and they'll keep your landscaping intact while making sure their work won't damage your home if it were to fall between your trees, should they come down during a storm for example.

How much does it cost to trim a big tree?

Trimming a tree overhead can be costly. If you hire a professional, it will range from $100 to $1,000 for a big tree depending on the size and height of the tree. Trimming doesn't cost much if you're doing the work yourself, but there's some risk involved in climbing - especially if your ladder isn't what is needed or if you don't have proper equipment.

You'll need ladders and saws with trees that are very tall or difficult to reach even from an extended ladder. Some contractors charge more because they have tools for this job - so research beforehand what equipment is required to get the job done safely and what prices are being charged by different companies in your area. It always sounds expensive when tree trimming is brought up, but if you factor in the potential damage a tree can do if it's not trimmed and maintained, then it becomes more of an investment that should be considered every few years.

If you're hiring someone to trim your tree, always get quotes from at least three different companies to get an idea of what the average price is. You don't want to end up overpaying for this service, but you also don't want to skimp on safety by going with the cheapest option. Doing your homework ahead of time will help ensure you find the best deal while also getting the job done properly.

When to trim birch trees

Wait until the tree has lost most of its leaves and then trim it back. This will help keep the tree healthy and looking good. You don't want to wait too long, or the tree will start to grow back wild and you'll have to trim it again.

Tree trimming is something you don't want to go without. You'll end up with a tree that's got dead branches all over the place and looks like such a mess that it needs to be chopped down anyway.

You need to find out when you should trim birch trees in order to keep them healthy and looking good. If your tree hasn't dropped any leaves then now is not an ideal time to do it because you are going to stress the tree out! Birch trees are hardy enough that they can withstand a little bit of stress, but you don't want to go overboard.

Make sure you use a good pair of tree trimming shears when you do this! You don't want to damage the tree by using bad tools. There are a lot of different types of tree trimming shears out there, so make sure you do your research before you buy them.

If you're not comfortable doing this yourself, you can hire us to do it for you. Just get in touch!


Prune Your Trees
Pruning trees

Why should you choose tree trimming Bell California?

While tree trimming Bell California is a tree service, tree pruning is often performed to improve the health and appearance of trees. This tree care service may involve selective tree crown reduction, thinning or removal of entire branches. Tree types that are typically trimmed include oak, ash and pine. Some tree species are best left to experts; others can be improved by carefully removing small amounts of growth at various branch unions - where the branch attaches to the trunk or main limb.

Different tree trimming methods exist for different tree types. For example:

  • Firmly supporting the tree with an upright wood brace before cutting prevents further damage to the tree should it fall following a large branch removal. For tree types not suited to tree trimming, tree removal may be recommended.
  • The first step in tree trimming is to assess the tree and determine how much growth needs to be removed; this is done by evaluating the tree's structure and overall height, as well as whether there are dead branches that need removing. The correct tool for removing excess stem or branch growth depends on the size of the tree and amount of such growth. Mechanical tree loppers (a tool with a long handle and an adjustable blade) can remove branches up to 1 inch thick, while power saws can cut larger stems up to 4 inches thick. Then, selective thinning of branches follows: Pruning shears remove smaller branches up to 1/ 2 inch in diameter, while tree saws can remove branches up to 3 inches in diameter.
  • It is important to note that tree trimming Bell California or any tree care service should not be done during the winter months when a tree is dormant. In addition, tree trimming should only be done by an experienced professional arborist who knows how to properly prune trees without damaging them. Improper tree trimming can cause long-term damage and even death of a tree.

If you're looking for quality tree trimming services, contact Tree trimming Bell California today! We offer a wide range of tree care services to meet your needs.

Service Your Trees

Get Your Quote

* 100% Privacy Guaranteed, see our Privacy Policy.

Bell, California

Bell, California